The Bike Rib® Series I
The Bike Rib Series I is constructed of 1 1/4" (1 5/8" o.d.) Sch. 40 steel pipe. The inverted-U portion of the rack is 32" H and 18" W, available in 2-bike, 4-bike, 6-bike, and 8-bike models. The 4-bike, 6-bike, and 8-bike rack are a series of inverted-U's welded to 2" x 1" x 3/16" channels. The BR4, BR6, and BR8 models are for surface mounting only, while the BR2 can be mounted inground or on the surface. Other sizes and dimensions are available upon request.

Spec Sheet  :  Colors & Finishes  :  CAD Drawings

The Bike Rib® Series II
The Bike Rib Series II is constructed of 1 1/2" (1 7/8" o.d.) Sch. 40 steel pipe. The inverted-U portion of the rack is 32" H and 12" W, available in 2-bike, 4-bike, 6-bike, and 8-bike models. The bottom portion fo the rack that connects the inverted-U's is held 1 1/2" off the ground on the BR4, BR6, and BR8 racks. The Bike Rib Series II can be mounted inground and on the surface.

Spec Sheet  :  Colors & Finishes  :  CAD Drawings

The Bike Rib® Series III
The Bike Rib Series III is constructed of 1 1/2-inch (1 7/8" o.d.) Sch. 40 steel pipe. The inverted-U portion of the rack is 32" H and 16" W, spaced 28" on center. The Bike Rib Series III is available in 4-bike, 6-bike, and 8-bike models. The Bike Rib Series III can be mounted inground and on the surface. Other sizes and dimensions are available upon request.

Spec Sheet  :  Colors & Finishes  :  CAD Drawings

The Park 'n Sit
The Park 'n Sit bench rack comes in two sizes: 1-Bike models are 5' 8" long and 2-Bike models are 6' long. The bench racks are constructed of 1 1/2" (1 7/8" O.D.) Sch. 40 steel pipe. The seat slats are 2" x 1 1/4" steel flat bar. The base plates are 4 1/2" dia. x 1/4" with two 1/2" anchor holes in each. All benches with bike racks are surface mount.

Spec Sheet  :  Colors & Finishes  :  CAD Drawings