The Bike Rib® Series II
The Bike Rib Series II emphasizes function over form. The result is an aesthetic bike rack that allows equal access at each point of attachment, and easy lock-up of bike frame and wheels.
Follow a link below or scroll down for all Series I information:
Specifications and Mounting Options
The Bike Rib Series II is constructed of 1 1/2" (1 7/8" o.d.) Sch. 40 steel pipe. The inverted-U portion of the rack is 32" H
and 12" W, available in 2-bike, 4-bike, 6-bike, and 8-bike models. The bottom portion of the rack that connects the inverted-U's is held 1 1/2" off the ground.
The Bike Rib Series II can be mounted in two ways:
- Inground Mount (I.M.), with a 12" leg for below-grade installation
- Surface Mount (S.M.), with 5 1/2" dia. x 3/8" base plate with two anchor holes in each
 |
Inground Mount
Elevation
|
Surface Mount
Elevation
|
Return to Top
Sizes
The Bike Rib Series II is available in four standard sizes:
|
|
|
|
|
Model BR2 |
Model BR4
48" long |
Model BR6
84" long |
Model BR8
120" long |
Return to Top
Colors and Finish Options
 The Bike Rib Series II is available in a variety of colors and finish options:
Colors
Finish Options
- Galvanized: Hot-dipped after fabrication.
- Powder Coat Paint: Polyester powder coat. Standard color: black hammer.
- Thermo Plastic Coating: A kind-to-the-bike finish (soft to the touch). Standard color: black.
Return to Top
A Little History
The Bike Rib Series II has evolved from traditional and serpentine-shaped bike racks:
Traditional Linear Bike Racks
Obviously obsolete—it's not enough to lock just the front wheel. When used as intended, this design prohibits the use of the U-lock on the bike frame except when parking at either end of the rack. The remainder of the bike is left unsecured. |
The Serpentine-Shaped Rack
(adding visual appeal to bike parking)
Better than its predecessor, but the design creates its own set of problems. Difficulty in bike placement and access can cause this rack to become full at two-thirds of its intended capacity. An interesting form, but not the most functional bike rack. |
The Bike Rib Series II
(form following function)
Each bike has equal access to the rack for locking bike frame and front wheel (the front wheel is the most vulnerable to theft). Parking only requires access from one side and all bikes may be parked in the same direction. The rack may be placed as little as two feet from adjacent wall or object. |
|
|
|
Return to Top
 Resources and How to Order
The Function First Bike Rib Series II is easy to spec and order. Start with the following resources:
After viewing these, use our How to Order online resource to guide you through the spec and order process. You may also request a quote online or contact us to order.
Return to Top
For more information, please contact us.
|
Specifications Sheet